Stationary vehicle inspection system ST-6035
Stationary vehicle inspection system with arc-shaped detector line and penetration up to 400 mm in steel for Customs, Border and other types of control of all types of vehicles
High quality and informative images
High penetration
400
mm in steel
Maximal penetration
Implementation of all scientific and technical solutions for material discrimination
More about the operating principle
The ST-6035 a set of fundamentally new scientific and technical solutions that allow accurate determination of four groups of materials by effective atomic number, as well as estimating the mass of cargo and individual objects with accuracy no more than 10%
Operation of the system in the deep penetration mode for the object sections with reduced scanning speed allows to reach the penetration value up to 460 mm in steel, which allows to effectively inspect also a number of bulk cargoes
The detection system is an arc-shaped mechanical construction with an integrated climate control system
The arc-shaped detector line allows to obtain X-ray image of the scanning object with minimal geometric distortion and high spatial resolution, one of the best in the class of systems of this type
Technical parameters
Beam energy | 6/3,5 MeV |
Maximum penetration in steel | not less than 400 mm |
Wire detection, Ø | 0.5 mm |
Contrast sensitivity at half penetration rate | 0,5% |
Number of discriminated groups of materials | 4 |
Nominal scanning speed | 24 m/min |
Maximal throughput | 25 vehicles per hour |
Maximal dimensions of scanned vehicles (L х W х H) | 20×3×4.5 m |
Power consumption | 45 кVА |
Products